Installation Guides

PTB-RACING clutch systems should be installed by qualified technicians familiar with performance driveline components.

Before installation:

• Verify vehicle compatibility.

• Inspect all related drivetrain components.

• Follow manufacturer torque specifications.

• Replace worn or damaged components.

• Ensure all mating surfaces are clean and free from contamination.

Guide Information

Most PTB-RACING clutch systems share the same basic installation procedure. Vehicle-specific guides primarily cover application-specific differences such as flywheel type, release system configuration, hardware requirements, and torque specifications.

Please review the guide for your specific application before beginning installation.

Available Guides

BMW

• BMW E-Series Installation Guide (PDF)

• BMW F-Series Installation Guide (PDF)

• BMW G-Series Installation Guide (PDF)

•  BMW Slave Cylinder Installation Guide (PDF)

Audi

• Audi B5 Platform Installation Guide (PDF)

• Audi B6/B7 Platform Installation Guide (PDF)

• Audi B8/B8.5 Platform Installation Guide (PDF)
  

Volkswagen

• Volkswagen 1.8T Installation Guide (PDF)

• Volkswagen VR6 / R32 Installation Guide (PDF)

• Volkswagen MQB Platform Installation Guide (PDF)

General Documents

• Clutch Break-In Procedure (PDF)

• Flywheel Installation Notes (PDF)

• Vibrations during driving (PDF)

Technical Support

For technical questions regarding installation, please contact:

usa@ptb-racing.com

Important Notice

PTB-RACING recommends professional installation. Improper installation may result in clutch damage, drivability issues, or component failure.

Always follow the supplied installation instructions and observe all applicable workshop procedures.